Bowl Sander Construction Kit

Excellent kit and quite easy to put together. However, it appears to suggest in the instructions that you need a number if metric tools to complete.Not so - a 3/4 inch worked in place of a 19mm drill for the bearing, a 3/8 inch in place of 11mm drill and, not having a 8mm hex key I used a screwdriver to the insert screw. Job done.

An excellent all-in-one kit to make your own bowl sander. Took me one afternoon to complete and performs really well at a fraction of the cost of a bought one and I have the satisfaction of knowing that I've made it.
I have rated it 4 star because the adhesive on the sponge pad is totally inadequate. Despite sanding the face to a smooth finish and sealing the wood the pad wouldn't have stuck to a rice pudding let alone wood. I ended up supergluing the pad and it works fine so it's not a deal breaker. No hesitation in saying take it for a spin.

Easy to produce a useful tool saving money. Recommended

Parts ordered arrived quickly and packaged well. They all look very good, however I cannot give a rating as I have been busy with other things. Used your products previously and would rate 5 *. Like you’re videos. I would appreciate next time you ask for feed back you don’t ping my mobile at 12.20 am I was asleep.

The Prokraft bowl wander works as it should where there is option to make 2 heads i made one smaller the the 2 inch to sand smaller areas.

Fun to make to your own requirements, saves money, great tool at the end. Plus use the M8 mounting thread in your drill and you get a power sander for free, and the normal great service from Prokraft

Great value and good service fun making it..

As a beginner I purchased this and had a go at making a bowl sander following the video online and the parts was that was supplied as extremely happy with the outcome and the service Great value for money and came right on time when it said it was

Bought the kit .put it together today .made the handle from a old branch loping shear that had a broken ..and the joint part and sanding disc holder made from some old teak windowsill. ..had a go with it fantastic can't belive the difference to the sanding process .as I have another handle left from the broken shear might have to purchase another kit.... best thing I made it...thanks procraft well thought out...

was pleased with the components to create this Bowl Sander. Found the instructions and video very helpful in creating it. May have missalighed the bearings slightly as I hadn't got access to a pillar drill but it does work. I did do away with the wingnut on the head as I felt it may be likely to catch occasionally if you were not fully attentive so I changed it for a Nyloc nut. time will tell as to it's durability and my workmanship creating it.