Premium ceramic Salt & Pepper grinder kits available from 4" to 10" kits
Our premium ceramic grinders grind like no others, we don't use cheap plastic parts for salt (because they dont last)
Ceramic grinders are by far the best and longest lasting parts - they even surpass metal burrs in performance and longevity
Our Easy fit kits are designed for the UK/EU and need only a 25mm central shaft - (other kits with a plastic spring retainer often need a special imperial drill size which are expensive in the UK)
Now upgraded with stainless steel bottom burr retainer plate
Sizing guides are: GK-4 GK-6 GK-8 GK-10
IF YOU HAVE NOT MADE A MILL BEFORE SEE OUR COMPREHENSIVE GUIDE BELOW
SEE OUR GUIDE TO SALT & PEPPER MILLS
8" Salt & Pepper grinder fitting guide CLICK HERE
See our SIMPLE GUIDE TO MAKING MILLS
09 February 2024 | Greg
Excellent service. Much too cold in my unheated shop to evaluate. Probably April.
Was this helpful to you? Yes / No
18 March 2023 | Simon
Ordered two of these kits to replace the one's in my salt and pepper grinders. The original 8 inch square bar, had for some reason, worn away all four corners of the square bar were the top met. I assume that there was something wrong with the quality of the bar, wasn't hard enough, so I have replaced them with these kits. So far so good, but as they say only time will tell. Very quick delivery and was very happy with them.
Was this helpful to you? Yes / No
02 March 2023 | James
These are what they say easy fit
Was this helpful to you? Yes / No
23 February 2023 | Kenneth
Works great.
Good paper instructions and video.No special tools needed is a bonus.
Good quality and service as always.
Was this helpful to you? Yes / No
Good product and great customer service 27 September 2022 | Jeffrey
I have used Prokraft salt and pepper grinder kits a few times now and find them very effective at a competitive price. Customer service and communication are brilliant and Prokraft is my go to company for this type of product. Highly recommended.
Was this helpful to you? Yes / No
22 March 2022 | Ian
Have not completed the Mills yet but seems a very good component, the ceramic grinder is so much better than plastic ones you get with some
Was this helpful to you? Yes / No
19 June 2021 | Richard
Watched the video and made them very straight forward to make. The customer was very pleased with them. Really smooth action.
Was this helpful to you? Yes / No
27 January 2021 | Geoffrey
Never made a salt/pepper mill before. The video and printed instructions are excellent and make this a successful and enjoyable project. Speedy delivery. An all-round excellent product and a delight to make.
Was this helpful to you? Yes / No
25 January 2021 | Steve
Recently purchased the 8” salt and pepper grinder kit. Seems very well made and the grinders have turned out great. The only thing I’m a bit concerned about is that one of the ceramic grinders doesn’t seem as smooth running as the other. If you loosen it off it turns but doesn’t grind and if you tighten it it doesn’t turn very well. Maybe a fault in the ceramic grinder?
Was this helpful to you? Yes / No
Response:
The problem described is usually due to the burrs not being fitted level or the top and bottom of the mill not being in alignment. This causes the inner burr and outer burr to fit at an angle and not grind correctly. If you swap the grinders in the units you can identify the problem. We will happily replace a faulty grinder but have never had one so far.
01 December 2020 | Bob
Being relatively new to turning (Lock Down hobby...) I was a bit wary of attempting a grinder set. Ordered the kit from Prokraft and have just turned my first set. It all went together perfectly and the on-line video and printed instructions were a massive help. Guess what EVERYONE is getting for Xmas this year. Great service, great parts, great instructions. I'll certainly put Prokraft to the top of my supplier list.
Was this helpful to you? Yes / No
Read all 16 customer reviews...